[Pacifica Trailing Stop: Activation Price to Ensure Stop-Loss Starts Above Break-Even] @pacifica_fi To prevent the stop-loss of a 2% trailing stop from falling below your entry price, the activation price must be set at or above approximately 102.04% of your entry price. The activation price determines when tracking begins and, together with the trailing width, sets the initial stop-loss level immediately after activation. Pacifica Trailing Stop (Sell) tracks the highest price reached after activation and places the stop-loss a fixed percentage below that high. The stop-loss rises with the price but remains stationary if the price declines; when the price retraces to the stop-loss level, a market order is triggered and the strategy ends. Let’s calculate this with a long position at an entry price of $100,000 and a 2% trailing stop. All figures are hypothetical examples for illustrative purposes. 1. Activation Price to Prevent Stop-Loss from Falling Below Entry Immediately after activation, the stop-loss must be ≥ activation price × 0.98. To ensure this stop-loss is ≥ $100,000, the activation price must be at least $100,000 ÷ 0.98 ≈ $102,041. To account for fees, raise it further. Assuming a 0.04% taker fee on both entry and exit, your break-even becomes ~$100,080. Therefore, the activation price should be ~$102,123. 2. No Protection Before Activation If you set the activation price at $102,123 but the price only reaches $101,500 before dropping to $95,000, the trailing stop will never trigger. Price declines prior to activation are not protected—you must use a separate stop-loss order for this phase. If you leave the activation price blank, tracking begins the moment you place the order, and the initial stop-loss is set at 2% below that reference price. If your reference price equals your entry price ($100,000), your first stop-loss will be $98,000—below your entry. 3. Percentage vs. Dollar Trailing Diverge as Price Rises A 2% trailing stop widens as the high increases: at $120,000, it becomes $2,400. A fixed $2,000 trailing stop equals 2% at $100,000 but only ~1.67% at $120,000—meaning it triggers on smaller retracements as price rises. 4. Stop-Loss Level ≠ Execution Price Once triggered, a market order is placed within your Max Slippage range. In fast markets, you may execute at a worse price than the stop-loss level—or only partially fill. The values above indicate the trigger point—not guaranteed execution prices. 5. Order Form vs. Positions Table: Different Behavior To protect a long position via the standard order form: select “Sell” direction and enable “Reduce Only.” If “Reduce Only” is disabled, the order becomes a new entry order during a retracement. If you attach the trailing stop directly via the Positions table, it submits a reduce-only market order for your full position size at activation. Any additional entries in the same direction after that will also be included in the liquidation order. Actual filled quantity depends on liquidity and Max Slippage. You may choose either “Mid” or “Mark” as your price reference; the same reference is used for recording highs and detecting retracements. Last traded price cannot be used as a reference. To summarize your setup: First, determine your minimum acceptable level (entry price or break-even including fees). Then set your activation price floor at: minimum level ÷ (1 – trailing percentage). Use a separate stop-loss order to protect against declines before activation. Official documentation: https://t.co/mrll1DkS5A #Pacifica
Grid (❖,❖) | Web3 ResearchShare

Source:Show original
Disclaimer: The information on this page may have been obtained from third parties and does not necessarily reflect the views or opinions of KuCoin. This content is provided for general informational purposes only, without any representation or warranty of any kind, nor shall it be construed as financial or investment advice. KuCoin shall not be liable for any errors or omissions, or for any outcomes resulting from the use of this information.
Investments in digital assets can be risky. Please carefully evaluate the risks of a product and your risk tolerance based on your own financial circumstances. For more information, please refer to our Terms of Use and Risk Disclosure.